Communicate with spirits? Ask your questions...See the answers...and More!
The Flux2 responds clearly when you ask a question by lighting up as either Red or Green lights and also with a tone that indicates an answer to your question. You ask the questions and use the lights and tones as your answer key. A simple example is you can ask the spirit to light up green for yes and red for no. The answers will be very clear, visual and audible! Use it as a trigger prop and put object near it to see if you can get some interaction. One example of this is to put tobacco nest to the green light side and put a cigar on the red light side. Now ask which the spirit prefers. You can get a definite answer and the possibilities are endless.
More samples of simple questions you can ask:
- Yes / No
- Good / Bad
- Male / Female
- One / Many
- Light / Dark
- Left / Right
Adjust the area coverage: You can now set the area you are covering for each session and location. You can set the area to be just right around the Flux and talk to the spirits nearby or you can set the coverage area to be up to 7ft to speak with more spirits in a larger area.
Detect Changes in the Environment: The Flux 2 paranormal communication device uses multiple environmental sensors to determine a responses based on location of motion, distance and temperature changes. It includes two highly sensitive infrared laser motion and distance sensors. These sensors provide quick and precise measurements of movement and distance. Also there is an ambient thermometer probe which reads the air temperature around the device.
- NEW Light and sound indicators to help determine distance
- NEW Zone selection to adjust sensitivity area
- Sound alerts with scaling tones for clear audible indicators
- Multiple environmental sensors for easy interaction
- Precise motion and distance detection on 2 sides
- Zone adjustment to set area of influence
- Temperature detection
- Color-changing lights to for indication and responses
- Rechargeable long-life battery with USB charger
- Battery life is 10+ hours on a single charge
- Size: 4"w x 3"h x 2"d
NOTE: The first 10 SECONDS while both lights are flashing allows you to set the Zone.
Turn the device ON by turning the red adjustment knob clockwise. Flux will begin flashing on both sides.
Set the ZONE by turning the red adjustment knob left or right. Both lights will flash a color to indicate the Zone.
Zone 1 (Green) = up to 1 foot distance
Zone 2 (Yellow) = up to 2 feet
Zone 3 (Red) = up to 4 feet
Zone 4 (Purple) = up to 7 feet (max)
After 10 SECONDS both lights will flash white and beep to indicate it is ready.
Set Flux down and step out of the Zone area to allow Flux to investigate and begin alerting.
You can reset the Zone at any time by turning the red adjustment knob again.
Stay out of the Zone. Motion and distance sensors on each side of the device alert to motion in the area. With that, you want to ensure you and your teammates remain out of the Zone or 'area of influence'. This is why we have included the ability to set the distance (or Zone) at which Flux interacts.
Set it on a solid surface. Naturally, with motion sensing being a key function of this device, movement will set it off. Make sure the surface is sturdy.
Blue pulsing lights = Flux is scanning for changes (no changes present)
Green with scaling short low tone = motion on the left side of the device
Red with scaling short high tone = motion on right side of the device
Green with long high tone = temperature drop
Red with long low tone = temperature rise
Response lights will remain on for 20 seconds to indicate that a response has recently taken place. This is in case you do not see the initial response. This will reset after 20 seconds unless it is interrupted again.
Directions for Charging
Using the USB cable provided, plug it into any USB or AC outlet (with the provided AC/USB adapter) to begin charging.
Red light near the USB port = Charging
Green light near the USB port = Fully Charged
A fully-charged battery will last over 10 hours.
Charging to will take about 1 hour
Flux device can be used while it's charging for unlimited use via wall outlet adapter or USB battery pack. A USB battery pack is handy so you can use the device and continue charging all while being completely mobile.