The Trip Wire with Sound!   Audible alerts when the trip wire is triggered.
 
The Trip Wire+ is a cable with attached sensors that react to EMF and change colors depending upon the strength of the source.
The Trip Wire+ comes in two lengths.  The Trip-12+ is 12 ft long with 10 evenly spaced sensors, and the Trip-36+ is 36 ft long with 12 evenly spaced sensors.
6 VIBRANT COLORS are emitted when sensing EMF.  Pink, blue, green, yellow, orange and red colors light up to EMF fluctuations & spikes. The lights are highly visible from all directions (360⁰ illumination), unlike other EMF meters such as the K2 which have smaller LEDs that aren't as  visible to members in your group. 
INCORPORATES SOUND ON/OFF which is located at the power supply.  When activated, a variable tone will be heard depending upon the number of sensors lighting up.
EXTENDED TIME DELAY for the lights.  In other words, when the color Red is activated, it will take approximately 4 seconds for the sensor to return back to the base Pink color as compared to approximately 2 seconds for the original Trip Wire.
EASY OPERATION! Simply position the cable and turn the power on at the battery supply.  The lights will briefly flash and settle down to the base color Pink.  Ideal locations for the Trip-12+ would be stairways, doorways, and surrounding trigger objects.  The Trip-36+ would be suitable for long hallways, aisleways, and stages where extra EMF coverage is needed. 
BROAD COVERAGE & FAST STAGING!  The Trip-12+ and Trip-36+ are quick and easy to set up and relocate compared to handling 10 to 12 individual Ghost Meters.  The cost savings is also substantial!  One Trip Wire+ can replace many, individual, expensive EMF detectors which use 9-volt batteries. 
Includes a 3” carabiner used to loop the cable and conveniently secure to your belt loop or backpack.
Includes an extra large, black, canvas pouch for storage.